Remotely control a wide range of applications from up to 300 meters away (in sight) with this 15 channel RF wireless radio remote control system which has a code learning function.
Ideal for use with:
- Vehicle central locking systems
- Garage doors
- Electronic gates
- Electrical appliances
- Electric windows
- Car sunroofs
- Heating systems
Easy to install and use, the 15 channel remote control system lets you take control of your gadgets, home, garage and car.
- Channels: 15
- Working modes: toggle, momentary, latched
- Decode: learning
- Power supply: DC 12V
- Relay: 20A/125VAC, 20A/16VDC
- Relay range: AC 110 - 240V or DC 0 - 28V
- Static current: 7 - 8mA
- Dimensions: 115 x 73 x 16mm
- Channels: 15
- Range: 300m (900ft)
- Encode: fixed code, soldered
- Dimensions: 100 x 45 x 20mm
- Power: 1- 23A 12V
- Toggle: press ->on, press again ->off
- Latched: press ->on, press other button ->off
- Momentary: press and hold ->on, release ->off
The 15 channel RF wireless radio remote control is brand new and boxed and includes receiver, transmitter.
Receiver relay port is in status: A normally open B common C normally closed
Instructions for use:
There are five kinds of work: signal self-locking, signal interlock, signal non-lock, signal lock and non-lock coexist
1, the signal from the lock - press the remote control on the 1st key to learn
2, the signal is not locked - press the remote control on the 2nd key to learn
3, the signal interlock - press the remote control on the 3rd key to learn
4, the signal 1 to 8 self-locking and 9 to 15 non-coexistence - press the remote control on the 4th key to learn
5, the first signal from the lock and 2 to 15 non-coexistence - press the remote control on the 5th key to learn
Note: If the learning receiver wants to change to other functions, please re-check the receiver after the code.
Press the learning button on the receiver to light up after the let go light to go into the learning state; according to their own needs to select the function of a remote control by the remote control, the receiver received a signal after the light flashes 1 said that learning success.
Press and hold the learning key on the receiver for about 8 seconds until the indicator goes off to indicate that the clearing was successful. This receiver can store about 30 remote control codes.